C'est votre chaîne et vous voulez obtenir plus de données ?
@bigclivedotcom

You can't even turn this unit off

Ajouté le mer. 25 sept. 2024 Science et technologie Rectangular HD

Aside from the very odd translation in the listing for this light, it appears that the extra cost-cut version has been stripped back to such a bare minimum that it has stability issues.

That's a big issue, since they have skimped to the point of removing the on/off switch, so the unit is active from the point it's assembled at the factory. When this one arrived its battery had been seriously over-discharged due to it turning on and off repeatedly while in its box.

Theoretically the box should block the PIR sensor from seeing movement completely, but I think it has created a situation where the sensor chips gain goes so high that it starts being affected by low level ambient electrical noise. It's not helped by the fact that there is no current limiting resistor for the LEDs, so the controller chip may be having thermal issues too, and the way its power is routed via the high current LED path also adds instability because the voltage will spike upwards when the LEDs turn off.

I tried the following things to try and solve the oversensitivity problem.

I added a 5.6 ohm resistor in series with the LEDs. Still false triggered.
I added a 22uF capacitor in parallel with the existing decoupling cap. Still false triggered.
I broke the positive track shared with the LED circuit and ran a direct link. Still false triggered.

The one thing that did seem to solve the problem was to put the unit on charge while in the box, suggesting that the battery voltage fluctuation and recovery when the LEDs turn off may have been an issue. That suggests that the cell impedance might be high because of the low capacity.
The charger was able to provide a more stable voltage under load.


If you enjoy these videos you can help support the channel with a dollar for coffee, cookies and random gadgets for disassembly at:- https://www.bigclive.com/coffee.htm
This also keeps the channel independent of YouTube's algorithm quirks, allowing it to be a bit more dangerous and naughty.


#ElectronicsCreators

Influenceurs YouTube

La liste des youtubeurs qui ont commenté cette vidéo.

Filtres

Pas de chaîne trouvée

Vérifiez vos filtres.
Nous utilisons des cookies pour vous assurer une utilisation optimale de notre site. En utilisant notre site, vous acceptez les Conditions générales et Politique de confidentialité suivantes. Accepter
Résumé automatique
Cette chaîne YouTube se concentre sur les dissectiobs, analyses et comparaisons de matériels informatiques, couvrant des domaines tels que l'électronique, les solutions d'éclairage, les technologies renouvelables et les accessoires associés. Elle propose des explications détaillées, des schémas et des recommandations, visant à offrir des informations précieuses aux passionnés, aux professionnels et aux réparateurs, soutenue par une approche axée sur la curiosité pour comprendre les dispositifs et leurs mécanismes sous-jacents.
Description
The trashiest electronic channel on YouTube. We test and use affordable electronic soldering equipment and tools to build, teardown, modify (and sometimes destroy) random electronic stuff.

A British TV licence is NOT required to view my videos or almost every other video on YouTube.

Many of the builds and projects featured here operate at full mains voltage and carry a high risk of shock and fire. As such they're really intended for either entertainment value or for those who do similar stuff.
The videos are generally uncensored and may contain tasteless jokes, profanities and even blood and electric shocks when things go wrong. So just like a normal workshop really.

So kick back, grab a beer and enjoy the ride.